2006 Jeep Wrangler
Mileage
152,736
Service Date
2/19/2026
Services Performed
- Customer States: TECHNICIAN FOUND: – Test drove and found: Vehicle drove well, heat working well. – PH level: 10 (very good) – Freezing Point: -34 deg F. – Coolant condition: good. – Visual inspection & pressure test results: Pressure tested, no signs of leaks or air bubbles. – Determined/Suspects: Cooling system working good at this time. – Recommends: No recommendations at this time.
- TECHNICIAN – Test drove vehicle, inspected operation & found; Vehicle drove well. – Inspected for dash/warning lights, found; None. – Scanned computer control modules & found; No codes related. – Inspected & found; Road tested while monitoring coolant temperature via scan tool and gauge on dash. Found when gauge is at 210 deg F scan tool shows between 204-215 deg F. When Gauge goes down slightly left of 210, scan tool shows 197-199 deg F. Verified temp at center vent @ 140 deg F. (Good) – Determined / Suspect; Appears vehicle cooling system is working normal at this time. – Recommends; No issues found at this time.
- TECHNICIAN INSPECTED AND FOUND: – No LOF sticker. – Engine oil level & condition; Low 1/2 qt. Brown / L2. – Front brake pads at approximately; 6mm. – Rear brake pads at approximately; 6mm. rotors rusty / L3. – Inspected for dash/warning lights, found; None. – Scanned computer control module and found; **(No number per code) Panel dimmer open. Code returns after clearing and cycling key. – Brake fluid dark, L3, Fail PH test / L4. Recommend performing a brake fluid service. – Clutch fluid contaminated with a gel like fluid / L3. Recommend flushing fluid or replace master /slave assembly.
Joe P. gave our service a 5 star review on 2/20/2026
